How to use this unit converter
Pick one of the five category cards — Length, Weight, Temperature, Volume or Speed — then type your value and choose the unit you have and the unit you want. The answer appears live on the right, written out in full (for example, “60 mph = 96.56064 km/h”), with the reverse rate and the value in the category’s base unit. Swap reverses the direction in one tap, Copy Result puts the answer on your clipboard, and Reset returns to the default miles-to-kilometres conversion.
The five categories, and what each one covers
Length covers millimetres to miles — eight metric and imperial units. Weight runs from grams to metric tons, including ounces, pounds and the stone used for body weight in the UK and Ireland. Temperature handles Celsius, Fahrenheit and Kelvin — the weather, cooking and science scales. Volume mixes metric millilitres and litres with US kitchen and fuel units: teaspoons, tablespoons, fluid ounces, cups, pints and gallons. Speed converts metres per second, km/h, mph and the knots used at sea and in aviation.
Built on exact definitions, not approximations
Many converters quietly use rounded factors — some use 0.45 kg for a pound, and the error grows with the number. This converter uses the official international definitions, so a conversion is as exact as the measurement you type in:
| Unit | Exact definition |
|---|---|
| 1 inch | 25.4 mm exactly |
| 1 mile | 1.609344 km exactly |
| 1 pound | 0.45359237 kg exactly |
| 1 US gallon | 3.785411784 litres exactly |
| 1 knot | 1.852 km/h exactly |
Each category converts through a single base unit — metres for length, kilograms for weight, litres for volume and metres per second for speed. Your value is multiplied into the base unit, then divided into the target unit, which keeps every pair of units consistent with every other pair.
Temperature is the odd one out
Four categories are simple ratios: double the metres and you double the feet. Temperature refuses to work that way, because the scales start at different points — zero Celsius is 32 Fahrenheit, and zero Kelvin (absolute zero) is −273.15 °C. So the converter uses the real formulas: Fahrenheit is first turned into Celsius with (°F − 32) × 5⁄9, and Kelvin by adding or subtracting 273.15. That is why 100 °F comes out as 37.777778 °C rather than a tidy number — the scales genuinely do not line up evenly.
Worked examples
| Conversion | Result |
|---|---|
| 1 mile → kilometres | 1.609344 km |
| 60 mph → km/h | 96.56064 km/h |
| 100 °F → Celsius | 37.777778 °C |
| 0 °C → Kelvin | 273.15 K |
| 1 US gallon → litres | 3.785411784 L |
| 5 kg → pounds | 11.023113 lb |
Try them yourself: the defaults in each category are set to one of these examples, so the answer is already on screen when you switch tabs — 60 mph in Speed, 100 °F in Temperature, 1 US gallon in Volume.
Watch out: US and imperial units are not identical
Length and weight units match between the US and the UK — an inch is an inch, and a pound is a pound. Volume is where they split. A US gallon is 3.785411784 litres; an imperial gallon is about 4.546 litres, and imperial pints and fluid ounces are larger than their US namesakes too. This converter uses US customary volume units throughout and labels them “(US)” in the lists. Two more traps: a metric ton (tonne) is 1,000 kg, while a US ton is 2,000 lb — about 907 kg; and a stone is exactly 14 pounds, which is why body-weight conversions from the UK can look surprising at first glance.
Honest limitations, and your privacy
The converter handles one conversion at a time and keeps no history — only the Copy Result button for the current answer. Results are rounded for display to at most six decimal places, beyond the precision of any kitchen scale, tape measure or speedometer. The unit list is deliberately the everyday set; specialist units such as US tons or imperial gallons are not included, rather than half-supported. And because every conversion runs in your browser, the numbers you type never leave your device.