How long is 500 words? The quick answer

500 words is about 1 page single-spaced and 2 pages double-spaced in Times New Roman 12pt on US Letter paper with 1-inch margins. That is the setup behind the calculator above — change the font, size or spacing and the same 500 words can run from under a page to well over two.

It is one of the most common questions in writing, because assignments, applications and briefs are almost always set in words while printers, teachers and editors think in pages. The honest answer is that a word count has no fixed page length until you fix the formatting — but with the standard formatting most schools and offices use, the answer is stable enough to plan around, and the table below covers the counts people ask about most.

Words to pages: the standard numbers

These figures come from the same model as the calculator — Times New Roman, 12pt, US Letter, 1-inch margins — so you can reproduce any of them above.

WordsSingle-spacedDouble-spaced
2500.5 pages1.0 pages
5001.0 pages2.0 pages
7501.5 pages2.9 pages
1,0002.0 pages3.9 pages
1,5002.9 pages5.8 pages
2,0003.9 pages7.7 pages
3,0005.8 pages11.6 pages
5,0009.6 pages19.2 pages

Two patterns are worth noticing. Double spacing does not quite double the page count at small numbers — 250 words is 0.5 of a page single-spaced and exactly 1.0 double-spaced — because the count is rounded up to the nearest tenth of a page. And the counts grow in a straight line: once you know that 500 words is 2 double-spaced pages, you know that 5,000 words is ten times the writing and lands at 19.2 pages.

How this calculator estimates pages

The estimate starts from the physical page. A US Letter sheet with 1-inch margins leaves a text area 6.5 inches wide by 9 inches tall. For the font you choose, the calculator works out how many average characters fit across that width — Times New Roman averages about 0.46 of its point size per character, Verdana about 0.58 — and divides by an average word length of 6 characters, including the space after each word. At 12pt that gives roughly 14 words on a line. It then divides the 9-inch height by the line height — the font size, times 1.2 for the font's natural leading, times your spacing — to get lines per page: 45 single-spaced, 22.5 double-spaced.

Multiplying words per line by lines per page gives the theoretical words per page, and the calculator then takes about a fifth off, because real text does not fill every line: paragraphs end part-way across the page, and every paragraph break starts a fresh line. That allowance is what turns the raw geometry into the familiar benchmarks — about 521 words on a single-spaced page and 261 on a double-spaced one. The result is rounded up to the nearest tenth of a page, since a document that spills three lines onto a new page still uses that page.

The rules of thumb worth remembering

If you remember one pair of numbers, make it this: 500 words per single-spaced page, 250 per double-spaced page at 12pt. Every other common case is a variation on it. Drop to 11pt and a single-spaced page holds about 621 words; go up to 14pt and it holds only about 383. One-and-a-half spacing splits the difference between single and double. And because the relationship is linear, doubling the words doubles the pages — the formatting decides the rate, the word count decides the distance.

Why your font changes the answer

Fonts differ in how much horizontal space each character takes, and page count is mostly a story about line length. Times New Roman was designed for narrow newspaper columns, so it packs roughly 14 words onto a 6.5-inch line at 12pt. Arial is a little wider — about 461 words fit on its single-spaced page, so 1,000 words runs to 2.2 pages instead of 2.0. Georgia and Calibri sit in between, at about 480 words per page. Verdana, designed for screens with wide letterforms and generous spacing, is the outlier: about 414 words per page, which turns a 500-word piece into 1.3 pages even before double spacing. If a brief specifies a font, it is usually to stop exactly this kind of quiet page-count inflation.

Essays and assignments: why double spacing rules

Most school and university essays are submitted double-spaced in 12pt Times New Roman or a similar serif font, with 1-inch margins — a format inherited from marking by hand, because the gaps between lines leave room for comments. That is why the double-spaced column of the table is the one students live by: a 500-word answer is 2 pages, a 1,500-word essay is 5.8, and a 3,000-word paper is 11.6. When a teacher sets a page limit instead of a word count, they almost always mean this format — but check, because a page limit in single spacing is twice as much writing. The Character Counter will give you the exact word count of a draft you have already written.

Reading time and speaking time

Page count is only one way to feel the length of a text. The calculator also converts your word count into time, using the averages researchers most often cite: about 238 words per minute for silent reading and about 130 words per minute for reading aloud or presenting. On those averages, 500 words is a 2.1-minute read and a 3.8-minute talk; 1,000 words is 4.2 minutes of reading and 7.7 minutes of speaking. Speeches, presentations and video scripts should always be planned against the speaking figure — and rehearsed with a timer, because nervous speakers speed up and careful ones slow down.

Why the real count is always a range

Treat every figure on this page as the centre of a range, not a guarantee. The model assumes Letter paper, 1-inch margins and even, prose-like lines. Change any of those and the count moves: narrower margins fit more words per line; a document full of dialogue, where every reply starts a new line, can run 10–20% longer than the same words written as solid prose; headings, lists, block quotations and footnotes all consume space the model does not see; and the same font can render slightly differently across programs and printers. None of this makes the estimate useless — it makes it a planning tool. If a submission has a hard page limit, use the calculator to get close, then check the real document and leave a tenth of a page or two in hand.

Common mistakes when converting words to pages

  • Assuming 500 words is always two pages. That is only true double-spaced. Single-spaced, the same 500 words is one page — half the writing a page-count brief might be expecting.
  • Forgetting the font size. At 14pt a page holds roughly 383 words single-spaced, not 521. A size change quietly rewrites every number in the table.
  • Trusting a word count from the wrong tool. Counters disagree about hyphenated words, numbers and headings — as our breakdown of why word counts depend on the tool explains. Count the way your teacher or client will count.
  • Planning a speech with reading speed. Silent reading runs at about 238 words per minute; speaking manages about 130. A script timed by reading will overrun by nearly half.
  • Treating the estimate as exact. Dialogue-heavy or heading-heavy documents break the model's assumptions. Check the formatted document before you submit.